Solid carbide spirals can be used in any application that other straight flute
Carbide tipped bits are used, such as trimming, shaping or grooving. Spiral
bits have a cutting edge that is constantly in contact with the material.
The load on the work piece and the bit is constant, uniform and draws less
power than the conventional straight bit. As a result more stock can be
removed and faster feed rates can be applied. The cut is a “peeling” action
rather than a “chipping” action. Spiral bits perform best at higher feed rates in a straight line and require more hold-down pressure. Conventional straight bits will be more efficient at slower rates and where you have a lot of turns in the cut.
Application:
Suitable for softwood, hard wares, plywood,
|
composite materials, plank, plastic and PVC material.
|
Primarily used on CNC Machines and automatic routers.
|
Suggestion RPM: 12,000(min) ~ 24,000(min).
|
Feed Speed: 5 - 12m / min
The above data of speed & Feed are just for reference.
|
The correct data are depending on the different situation.
|
|
|